Specifications (Subject to change without notice)

Display

Easy to Read, Yellow Text on Black Background

Suggested Operating Ranges

Standard High Range: UVA, UVB, UVV – 100mW/cm² to 10W/ cm²/ UVC – 10mW/ cm² to 1W/ cm²

Mid-Range: UVA, UVB, UVV – 10mW/ cm² to 1W/ cm²/ UVC: 1mW/ cm² to 100mW/ cm²

Low-Power: UVA, UVB, UVV – 1mW/ cm² to 100mW/ cm²/ UVC – 1mW/ cm² to 100mW/ cm²

Units will “turn on” and display data at irradiance values much lower than the suggested Operating Ranges. The suggested Operating Ranges are where the instrument performs best.

Accuracy

+/-10%; +/-5% typical

Spectral Ranges

(UV Power Puck®II)

4-channel continuous monitoring. Standard version: 320-390nm (UVA), 280-320nm (UVB), 250-260nm (UVC), 395-445nm (UVV)/ UVA2 Version: 380-410nm (UVA2 replaces the UVC band).

Spectral Ranges (UVICURE® Plus II)

1-channel continuous monitoring. 320-290nm (UVA), 380-410nm (UVA2 for LED monitoring and additive bulb monitoring), 280-320nm (UVB), 250-260nm (UVC), 395-445nm (UVV)

Spatial Response

Approximately cosine

Operating Temperature

0-75^๐C Internal temperature; tolerates high external temperatures for short periods (audible alarm indicates when temperature has exceeded tolerance)

Time-Out Period

2 minutes DISPLAY mode (no key activity). A no time-out mode can be activated by EIT-IM.

Battery

Two user-replaceable AAA Alkaline Cells

Battery Life

Approx. 20 hours with display on

Dimensions

4.60 x 0.50 inches; 117 mm x 12.7 mm (D x H)

Weight

10.1 ounces (289 grams)

Instrument Materials

Aluminum, stainless steel

Carrying Case Material

Cut polyurethane interior, scuff resistant nylon exterior cover

Carrying Case Weight

9 ounces (260 grams)

Carrying Case Dimensions

10.75 x 3.5 x 7.75 inches; 274 x 89 x 197 mm (W x H x D).

This equipment is in conformity with the following standards and therefore bears CE marking: IEC 61326-1:2005, EN55011:1998,

EN61000-4-2: 1995, A1: 1998, A2: 2001; EN61000-4-3: 2002, A1:2002, following the provisions of the applicable directives: 98/34/EEC

and amendments, 89/336/EEC and amendments.

Designed and manufactured in the USA.