Model CA51/ CA71
HANDY CAL calibrator

The CA51/CA71 HANDY CAL calibrators are comprehensive generating/measuring instruments for all your calibration and equipment checking needs at maintenance sites. The CA51/CA71
can simultaneously generate and measure voltage, current, TC, RTD and pulse signals, thus you don’t need to prepare many instruments. In addition, the incorporated rotary switches of good repute enable operations so smooth that an incorrect measurement caused from erroneous operations can be prevented.

With a resolution of 0.1°, an accuracy to ±0.5°C, and fast time to temperature, most industrial thermometers can be checked in about 10 minutes. It comes with a NIST-Traceable Calibration Certificate so you can rely on it as a thermometer standard.

Choose from four block configurations to match the diameters of the probes that you need to calibrate. For even higher precision, use the heat source to perform a comparison calibration with one of our high accuracy thermometry standards. Call us for more details.

This little dry block fits easily in your hand and in your tool box. You won't find a handier calibration tool that covers most all of your temperature range.

Non-Contact High Voltage Detector
Model 275HVD

>> Features
·Non-contact high voltage detector
·Wide range of detection; finds 80V to 275kV; one instrument fits all applications
·Eight switch-selectable voltage sensitivity ranges
·Lightweight, minimizes sway at the end of long hot sticks
·Audible and visual indication of live voltage
·Self-test ensures that all system functions and indicators are working properly by energizing the complete system
·Designed for use with hot sticks incorporating a universal spline adapter

>> Applications
·Non-contact detection of live voltages
·Check and detect live high voltage cables
·Find faults in cables
·Check grounding equipment
·Service neon lighting
·Trace live wires
·Check high frequency radiation
·Detect residual or induced voltages

FEATURES
·Non-Contact Ground Resistance Measurement
·No Auxiliary Electrode Needed
·Jaw Diameter Φ 23 mm (5601)
·Jaw Diameter Φ 35 mm(5637)
·0.025 – 1500 Ohm
·0.2mA– 30A(5601)0.2mA– 35A(5637),True RMS
·116 Sets of Memory(5601,5637)
·Programmable Hi and Lo Alarm(5601,5637)
·Programmable Data Logging (5601,5637)

>> The PAS-853B is a wide range ohmmeter designed specifically for ESD Plant Auditors who must make many measurements quickly while supporting ANSI/ESD S20.20 Program Standard and periodic verification requirements. The PAS-853B performs in accordance with standard resistance measurement practices outlined in ANSI/ESD 541 Packaging and meets all audit requirements of ESD TR53.
>> Variable & Constant test voltages
• <10 Volts Variable from 0.01 to 9.9x103 ohms
• 10 Volts ± <0.5V (±<5% Constant Voltage) from 1.0x104 to 9.99x105
ohms
• 100 Volts ± <5V (±<5% Constant Voltage) from 1.0x106 to 9.99x1012 ohms
>> Wide Resistance Measurement Range from 0.01 ohm to 9.99x1012 ohms
■ Nominal Full Range Tolerance Averages <±5%
■ Fully Automatic Resistance Range, Test Voltage and Electrification Period control
■ Automatic or Continuous Electrification Control
■ Rugged High Performance 80 inches (200cm) Test Leads
■ Powered by one long lasting 9V alkaline battery
■ Large, easy to read LCD Display
■ Meets requirements of ESD Association Standards for material and audit resistance
measurement requirements
■ Certificate of Calibration Traceable to NIST included