GasAlertMicroClip Specifications
GasAlertMicroClip XL
GasAlertMicroClip X3
Size
4.4 x 2.4 x 1.2 in./ 11.3 x 6.0 x 3.2 cm
Weight
6.7 oz./ 190 g
6.3 oz./ 179 g
Temperature
-4 to +122๐F/ -20 to +50๐C
Humidity
0% - 95% RH (non-condensing)
Alarms
Visual, vibrating, audible (95 dB) ● Low, High, STEL, OL (over limit)
Tests
Audible/visual alarms on activation; sensors, battery and circuitry (continuous)
Typical battery life
18 hours; recharges in less than 6 hours
Note: Approximately 20% capacity loss is normal with lithium polymer batteries
after 500 charge cycles. Refer to the Operator’s Manual for additional information.
User options
Confidence beep
Set STEL interval
Sensor on/off
Latching alarms
Safe display mode
Stealth mode
Calibration lock
Auto zero on start up
O2 auto calibration on start up
Set bum[p test interval
Force bump test when overdue
InteliFlash™ interval
Combustible gas measurement
(%LEL or % by volume methane)
User-settable calibration
Gas level
Force calibration when overdue
Low alarm ackhowledge
Language choices
Set custom start up message
Sensor Specifications
Gas
Measuring Range
Resolution
H2S
0-100 ppm
1 ppm
CO
0-500 ppm
O2
0-30.0%
0.1%
Combustible gases
0-100% LEL
0-5.0% v/v
1%
Alarm setpoints for all sensors are user adjustable. Setpoints are automatically displayed during instrument start up.