Characteristics

STATISICAL PROCESSING & PRINTING OF INSPECTION REPORT

The HF series can calculate figures of the satandard deviation and the process capability index and those figures can be printed out on your printer in form of the inspection report when the CENTRONICS INTERFACE(OPTIONAL) is adopted.

COMPARATOR FUNCTION

Initial input of the tolerance limit (upper/lower) enables the device to judge the measured result as GO/NO.

MEMORY FUNCTION

Measured results will be automatically memorized up to 256 measurements.

HIGH ACCURACY, HIGH RESOLUTION

The HF series have achieved extremely high accuracy; such as ±0.2%F.S. of accuracy and ±0.1%F.S. of repeatable accuracy. And also, the HF series perform extremely high resolution. For example, the 1kgf capable device can indicate minimum 0.1gf. It means 1/10000 resolution.

MULTIPLE FUNCTIONS

Initial setting on the device is possible for measurement of peak force, insertion/withdraw force, insertion compression peak force, withdraw extension peak force and holding force at contact point Also, the devices is applicable for setting of various printing modes, input of local Newton value and other various modes settings.

UNIT CONVERSION

It is possible to convert the graduations of N, kgf(gf) or lbf on the device.

PEAK HOLD FUNCTION

Single operation can perform measurement of both compression peak data at insertion and extension peak data at withdraw.

EASY OPERATION

Buttons are well arranged for easy operation th perform multipurpose measurment.

AUTOMATIC POWER OFF

The HF series have automatic power-off function to save battery and to keep the device safe. Power off time can changed at the range of 01-99min.

LOCAL NEWTON VALUE INPUT

The terrestrial gravitation varies with where measurement is performed. Measurement error by gravity difference will be eliminated by inputting the local Newton value according to the measurement place.

RS232C SETTING FUNCTION

It is possible to set data bit length, baud rate, stop bit length and parity bit to connect with your computer.

VARIOUS OUTPUT

Various options are offered for outputas; CENTRONICE output, RS-232C output, analog output, digimatic output and switch output. 

Specifications